t30mdl1sm-rev0717
sandpiperpump
.
com
11
• Model T30 Metallic
Air Distribution Valve Assembly
IMPORTANT
Read these instructions completely, before installation
and start-up. It is the responsibility of the purchaser
to retain this manual for reference. Failure to comply
with the recommendations stated in this manual will
damage the pump, and void factory warranty.
Air Distribution Valve Servicing
See repair parts drawing, remove screws.
Step 1:
Remove Hex Head Cap Screws (1-F).
Step 2:
Remove end cap (1-E).
Step 3:
Remove spool part of (1-B) (caution: do not scratch).
Step 4:
Press sleeve (1-B) from body (1-A).
Step 5:
Inspect O-Ring (1-D) and replace if necessary.
Step 6:
Lightly lubricate O-Rings (1-D) on sleeve (1-B).
Step 7:
Press sleeve (1-B) into body (1-A).
Step 8:
Reassemble in reverse order, starting with step 3.
Note:
Sleeve and spool (1-B) set is match ground to a specified clearance
sleeve and spools (1-B) cannot be interchanged.
Air Valve Assembly Parts List
(Use w/Aluminum centers only)
Item
Part Number
Description
Qty
1
031.183.313
Air Valve Assembly
1
1-A
095.109.313
Body, Air Valve
1
1-B
031.139.000
Sleeve and Spool Set
1
1-C
132.029.357
Bumper
2
1-D
560.020.360
O-Ring
10
1-E
165.127.313
Cap, End
2
1-F
170.032.115
Hex Head Capscrew 1/4-20 x .75
8
1-G
901.037.115
Lockwasher
8
Air Valve Assembly Parts List
(Use w/Stainless Steel centers only)
Item
Part
Number
Description
Qty
1
031.179.000
Air Valve Assembly
1
1-A
095.109.110
Body, Air Valve
1
1-B
031.139.000
Sleeve and Spool Set
1
1-C
132.029.357
Bumper
2
1-D
560.020.379
O-Ring
10
1-E
165.127.110
Cap, End
2
1-F
170.032.115
Hex Head Capscrew 1/4-20 x .75
8
4: AIR
END
Tel: 866-777-6060
Fax: 866-777-6383
Springer Pumps, LLC
Website: www.springerpumps.com
Int'l: +001 267 404 2910
