background image

s05nmdl2sm-REV1107

SERVICE & OPERATING MANUAL

Model S05 Non-Metallic Design Level 2

Table of Contents

CE

U.S. Patent # 
400,210; 5,996,627; 
6,241,487

Engineering Data and Temperature Limitations ........................................................1 
Explanation of Pump Nomenclature .........................................................................2 
Performance Curve...................................................................................................3 
Dimensions ...............................................................................................................4 
Metric Dimensions ....................................................................................................5 
Principle of Pump Operation .....................................................................................6 
Installation and Start-up ...........................................................................................6 
Air Supply .................................................................................................................6 
Air Valve Lubrication .................................................................................................6 
Air Line Moisture .......................................................................................................6 
Air Inlet and Priming .................................................................................................6 
Between Uses ..........................................................................................................6 
Installation Guide ......................................................................................................7 
Troubleshooting  .......................................................................................................8 
Warranty ...................................................................................................................8 
Important Safety Information ....................................................................................9 
Material Codes .......................................................................................................10 
Composite Repair Parts Drawing ...........................................................................12 
Overlay Option Drawing, Muffler Option Drawing ...................................................12 
Available Service and Conversion Kits ...................................................................12 
Composite Repair Parts List ...................................................................................13 
Air Valve Assembly Drawing and Parts List  ...........................................................14 
Air Valve Assembly Servicing .................................................................................15 
Air Valve with Stroke Indicator Assembly Drawing and Parts List ...........................16 
Air Valve with Stroke Indicator Assembly Servicing ................................................17 
Pilot Valve Servicing, Assembly Drawing, and Parts List ........................................18 

Solenoid Shifted Air Valve Drawing ........................................................................19 
Solenoid Shifted Air Valve Parts List ......................................................................19 
Solenoid Shifted Air Distribution Valve Option ........................................................20 
Intermediate Assembly Drawing, Parts List and Servicing .....................................21 
Check Valve Drawing and Servicing .......................................................................22 
Diaphragm Service Drawing, Non-Overlay .............................................................23 
Diaphragm Service Drawing, with Overlay .............................................................23 
Diaphragm Servicing ..............................................................................................24 
Overlay Diaphragm Servicing  ................................................................................24 
Dual Port Option Drawing .......................................................................................25 
Dual Porting Options ..............................................................................................26 
Dual porting of both suction and discharge ends of the pump ...............................26 
Single porting of the suction and dual porting of the pump discharge ...................26 
Dual porting of the suction and single porting of the pump discharge ...................26 
Single Port Suction Repair Parts List .....................................................................27 
Single Port Discharge Repair Parts List .................................................................27 
Dual Port Suction and Discharge Repair Parts List ................................................27 
Pumping Hazardous Liquids ...................................................................................28 
Converting the pump for piping the exhaust air ......................................................28 
Exhaust Conversion Drawing .................................................................................28 
Converted Exhaust Illustration ................................................................................28 
Pulse Output Kit Drawing .......................................................................................29 
Pulse Output Kit Option ..........................................................................................29 
Muffler Options .......................................................................................................30 
Grounding The Pump .............................................................................................31 
CE Declaration of Conformity .................................................................................32

II 2GD T5

WARREN RUPP, 

 

INC.  •  A Unit of IDEX Corporation  •  P.O. Box 1568, Mansfield, Ohio 44901-1568 USA  •  Telephone (419) 524-8388  •  Fax (419) 522-7867  •  www.warrenrupp.com 

©Copyright 2007 Warren Rupp, Inc. All rights reserved.

Summary of Contents for Sandpiper S05 Non-Metallic



































Reviews: