Open the plastic wrapped set of slats and space them on the bed frame as shown.
Screw down both ends of the slat at the
head end first.
Do the same with the foot end slat.
Do the same with the “middle slat” (see
arrows). But make sure that the tip of
this slat is pushed up against the inner
side of the bed as much as possible
while putting in the slat screws at both
ends of this slat.
Screw down the rest of the slats.
7.
Slot the headboard over the posts (usually takes two people) but please keep it horizontal as
it is lowered into place.
8.