FMT-XXX (Ver. 2.1) User Manual
----------------------------------------------------------------------------------------------
---------------------------------------------------------------------------------------------------------------
6
7. Mute Set
(1) Press and turn the adjusting knob to enter into SWR
configuration
menu.
(Fig. 18)
(2) Press the adjusting knob again to set mute.
(Fig. 19)
(3)
By turning the adjusting knob left or right to set mute on or off.
(4) Press the adjusting knob to confirm.
8. Exit
Anytime when you want to exit the configuration, you can press and turn the adjusting knob to enter
into the exit menu, press the knob again, the transmitter will be back to standby status.
(Fig. 20)
TROUBLESHOOTINGS
l
Warning! Please check the antenna!
—
Stand wave protection alert. Please check if the antenna has connected correctly, or if the
antenna feeder got damaged
l
HIGH TEMPERATURE WARNING!!!
—
High temperature alert. Please check if the transmitter vent has been blocked or if
ambient
temperature
is too high.
l
No displays of LCD
—
LCD does not work when power on the transmitter and the LED does not light. Please check if
the fuse on the power outlet burned out.
l
AC HUM
—
Please check if the power supply cable, RF output cable and audio lines are intertwined and avoid
any interfering source. Remember to use shielding audio line.
ABOUT US
We are a professional company focus on RF technology research and development, specialized in fm
transmitter! Our fm transmitters are ideal equipments to build your own broadcast station, especially
used in campus, factories, farms etc. Please be assured, we provide you after-all services and technical
supports! Any questions can be sent to:
.
