manualshive.com logo in svg

Warn ProVantage, Operator'S Manual, Page: 11 / 19

Share
Download
Warn ProVantage Operator'S Manual Download Page 11

WARN INDUSTRIES  *  BASIC GUIDE TO PLOWING

11

HOW THE PLOW WORKS

Single Line Rigging

Double Line Rigging

WARNING

WARNING

WARNING

WARNING

WARNING

Vehicle weight

balance and stability

can be greatly

changed when a

plow is attached and

when the vehicle is

pushing a loaded

plow.  With this

change, steering

and vehicle control

will be different.

Always operate the

vehicle at a low

speed with the blade

installed. Never

exceed 5 mph (8

km/h), even with

blade up.  Use low

range if vehicle is

equipped.

Plow Lift

The plow requires a lifting

device.  The lifting device maybe a
winch, a plow lift actuator or a
manual device.  If a winch is used,
it is recommended that the
operator replace the winch rope
with the plow lift rope listed in the
accessories section of the WARN
Powersports catalog
(www.warn.com).  It is also
recommended, that the standard
winch roller fairlead be replaced
with the plow roller fairlead.  This
fairlead has a large bottom roller
that will reduce rope wear.  Using a
winch to raise and lower a plow will
cause rope wear.  Always replace
a damaged or worn rope.  Consult
the WARN Basic Guide to
Winching booklet.

A winch rope may be rigged

single or double line.  A double line
requires a pulley to be attached to
the plow.  The winch rope is then
routed from the roller fairlead,
around the pulley, and then back to
the vehicle.  This method reduces
the load on the winch rope and
reduces the plow lift speed.  A
slower lift speed provides better
control of blade height and
minimizes lifting plow up against
vehicle or stalling lift mechanism.

For single line rigging, route

the rope though the guide and to
the back of the plow basetube
assembly.

Plow lift

The plow lift is another method

for lifting the plow.  This device is
specifically designed to lift the plow
blade and does not use a rope.
The actuator has internal parts that
prevent it from extending due to
plow weight.  It also contains
internal switches that automatically
stop the device when fully extended
or retracted.

Summary of Contents for ProVantage




















Reviews:

No comments