WARN INDUSTRIES
PAGE 1
75331 Rev. A0
INSTALLATION INSTRUCTIONS
MULTI-MOUNT KIT
Part Number: 75330
Application: Warn HP PowerPlant P/N 71800
Your safety, and the safety of others, is very important. To help you make informed decisions about safety, we have provided
installation and operating instructions and other information on labels and in this guide. This information alerts you to potential
hazards that could hurt you or others. It is not possible to warn you about all potential hazards associated with this product, you
must use your own good judgment.
CARELESS INSTALLATION AND OPERATION CAN RESULT IN SERIOUS INJURY OR EQUIPMENT
DAMAGE. READ AND UNDERSTAND ALL SAFETY PRECAUTIONS AND OPERATING INSTRUCTIONS
BEFORE INSTALLING AND OPERATING THIS PRODUCT.
This guide identifies potential hazards and has important safety messages that help you and others avoid personal injury or
death.
WARNING
and
CAUTION
are signal words that identify the level of hazard. These signal words mean:
WARNING signals a hazard that could cause serious injury or death, if you do not follow recommendations.
CAUTION signals a hazard that may cause minor to moderate injury, if you do not follow recommendations.
This guide uses
NOTICE
to call attention to important mechanical information, and
Note:
to emphasize general information
worthy of special attention.
CAUTION
MOVING PARTS ENTANGLEMENT HAZARD
Failure to observe these instructions could lead to minor or moderate injury.
q
Always
take time to fully read and understand the installation and Operations Guide included with
this product.
q
Never
operate this product if you are under 16 years of age.
q
Never
operate this product when under the influence of drugs, alcohol or medications.
Read installation and operating instructions thoroughly.
WARNING
INJURY HAZARD
Failure to observe these instructions could lead to severe injury or death.
q
Always
use extreme caution when drilling on any vehicle. Make sure that all fuel lines, brake lines, electrical wires, and other objects are not
punctured or damaged when/if drilling on the vehicle. Thoroughly inspect the area to be drilled (on both sides of material) prior to drilling, and
relocate any objects that may be damaged. Failure to inspect the area to be drilled may result in vehicle damage, electrical shock, fire or
personal injury.
q
Always
wear safety glasses when installing this kit. A drilling operation will cause flying metal chips. Flying chips can cause eye injury.
q
Always
use extreme caution when cutting and trimming during fitting.
q
Always
remove jewelry and wear eye protection.
q
Never
lean over battery while making connections.
q
Never route electrical cables:
o
Across any sharp edges.
o
Through or near moving parts.
o
Near parts that become hot.
q
Always
insulate
and
protect
all
exposed
wiring
and
electrical
terminals.
q
Always
install
terminal
boots
as
directed
in
installation
instructions.
q
Always
inspect
the
quick
connect
polarity
on
the
cable
from
the
battery
AND
the
cable
from
the
q
Always
use
appropriate
and
adequate
care
in
lifting
components
into
place.
q
Always
insure
components
will
remain
secure
during
installation
and
operation.
q
Always
tighten
all
nuts
and
bolts
securely,
per
the
installation
instructions.
q
Always
stay
clear
of
moving
parts
and
joints.
Always
keep
others
away
when
operating
or
adjusting
plow.
q
Always
replace
all
worn
or
damaged
parts
before
operating.
q
Never
operate
this
W ARN
product
with
damaged
or
missing
parts.
