Warn 102946 Installation Instructions Manual Download Page 5

Page: 5 / 6

102947A0

4. Install the mount, to existing mounting holes, using the two

flange head bolts (B1), washers (B2) and locknuts (B3).

NOTE: In some cases its easier to attach the power leads to

the winch before installing the winch

5. Install winch to mount using hardware and instructions

included in your winch kit.

NOTE: Be sure winch clutch dial

is on passenger side of vehicle..

6. Install wiring per winch installation instructions.

7. If you have an AXON winch follow the two steps below, if

you do not have an AXON winch - skip to step 8.

a. Use the two spacers (A2) (one on each side) at the

bottom of the bumper before securing to the vehicle.

The spacer will fit between of vehicle frame and bumper.

b. Using the lower factory hardware (removed in step 3)

to secure bumper with spacer to vehicle’s rearest

mounting hole. Refer to exploded view on page 3.

Figure 4

Figure 5

Figure 6

Spacer

Factory

Hardware

Summary of Contents for 102946

Page 3: ...UMBER DESCRIPTION QTY A1 83543 WINCH PLATE 1 A2 28885 SPACER PLATE 2 ITEM PART NUMBER DESCRIPTION QTY B1 79463 M10 HEX FLANGE HEAD BOLT2 B2 29926 M10 FLAT WASHER 2 B3 79463 M10 FLANGE NUT 2 B4 87165 M10 SOCKET HEAD BOLT 2 B5 69807 M10 LOCK NUT 2 B6 2228 3 8 HEX HEAD BOLT 2 B7 1829 3 8 LOCK WASHER 2 B8 2195 3 8 FLAT WASHER 2 ...

Page 4: ... 3 I N S T A L L A T I O N I N S T R U C T I O N S 1 Remove grille by pushing down on grilel tabs and pull grille outward 2 Remove the bumper top mounting bolts Retain hardware you will reinstall in a later step 3 Remove the lower bumper mounting bolts Retain hardware you will reinstall in a later step Figure 1 ...