©2018 Warn Industries, Inc. WARN® and the WARN logo are trademarks of Warn Industries Inc.
7
102494A0
Figure 11
B8
A5/A6
Lower
Hardware
Figure 12
Figure 13
M A I N T E N A N C E / C A R E
1. Inspect all parts on the winch, winch mount, and related hardware prior to each use. Replace all hardware that appears rusted or
deformed.
2. Inspect all nuts and bolts on the winch, winch mount and related hardware prior to each use. Tighten all nuts that appear to be
loose. Stripped, fractured, or bent bolts or nuts need to be replaced.
3. Check all cables prior to use. Replace cables that look worn or frayed.
4. Check all moving or rotating parts. Remove debris that may inhibit the part from moving freely.
(FOR ALL BUMPER MODELS)
15. Loosely secure
top
portion of anti-nod bracket (A5 and A6)
between bumper and frame using bolts (B8).
16. Secure lower portion of anti-nod bracket:
Steel Bumper: over the factory skid plate mounting
bracket and between the bumper and frame. Using
factory hardware
NOTE: Be sure to install hardware in
the same orientation as removed.
Plastic Bumper: using two flange nuts (B7)
.
17. Tighten top bolts now.
18. Install fairlead to winch mounting bracket (A2).
19. Place winch mounting bracket on top of bumper (aligning
mounting holes).
NOTE: We recommend getting assistance
to hold mounting bracket/fairlead in place to avoid tipping
hazard.
20. Install winch and wire to mounting bracket and bumper per
your winch installation instructions.
21. Tighten
ALL
hardware to specifications on page 2.
22. Your installation is now complete.
