©2018 Warn Industries, Inc. WARN® and the WARN logo are trademarks of Warn Industries Inc.
4
102768A1
I N S T A L L A T I O N I N S T R U C T I O N S
1. Remove the bumper by removing the four factory bumper
mounting bolts (two per side).
NOTE: Retain hardware. You
will reuse bolts for the winch mount installation.
2. Remove the two front factory skid plate bolts.
NOTE: Retain
hardware.
The skid plate will now hang down allowing room for the
winch mount and lower skid plate bracket install.
3. Install winch mount (A1) using the factory bumper hardware
previously removed in step 1.
Do not completely tighten hardware at this time.
Figure 1
Figure 2
Figure 3
Figure 4
A1
