Warmup 2WHP1.0, Installation Manual

Page: 2 / 21

2
Product Description
Technical Information
Electrical Information
Testing the Wall Panel
Planning
Important points
Getting Started
Wall Heater installation
Tiling Over the Wall heating
Installation and System
Documentation ( Pages 15-17 must be
completed and fixed at or near to the consumer unit.
)
User Information
Warranty
Contents
Items Required
A Warmup® Thermostat with temperature
sensor
NOTE: Only Warmup® Thermostats should
be used
30mA Residual Current Device (RCD),
required as part of all installations
Digital Multi-meter and Insulation
resistance tester (required for testing the
heating panels)
Electrical trunking/conduit for housing the
power leads
Electrical housing, back boxes and junction
boxes
(Back box for the thermostat must be at
least 35mm deep)
Tile Backer Boards (The heating panels
must be installed onto a cementious,non
flammable surface, such as a tile backer
board.
Gloves to protect your hands from the
fibreglass mesh
Scissors to cut the mesh when modifying
the panels.
Staples and staples gun - for fixing the
panel to the wall.
3
4
5
6
7
8
10
11
13
14
18
19