background image

SAFETY INFORMATION

• Towel warmers are designed to warm towels only and should not be 

  used for any other purpose.
• Never stand, sit on or hang on the towel warmer.
• Never allow children to play on or with the towel warmer.
• Make sure that the circuit breaker is shut off at the main electrical panel 

  before wiring or servicing your towel warmer.
• The towel warmer must be properly grounded.
• All wiring must be done in accordance with the National Electrical Code

  (NEC) and Canadian Electrical Code (CEC) and should be performed by 

  a licensed professional who is certified to do electrcal wiring.
• Never place your towel warmer inside a shower, sauna or steam room.
• Never attempt to warm more than two (2) towels on the 

  towel warmer at a time. Overloading the towel warmer will cause 

  the unit to become extremely hot and may result in a burn if touched. 
• Towel warmers are cULus listed for use in U.S. and Canada.

CLEANING INFORMATION

While the towel warmer is warm, clean with a soft, non-abrasive, damp 

cloth. Once the towel warmer has cooled, lightly polish with a soft, dry 

cloth. Do not use abrasive cleaning powders, metal polish or chlo-

rine-based cleaners on any part of the towel warmer.

INSTALLATION

This appliance must be installed in accordance with the instructions in the 

manual and the NEC and CEC guidelines relating to electrical fixtures in 

bathrooms. The towel warmer MUST be on a GFCI protected circuit and 

wired by a licensed professional who is certified to do electrical wiring.

OPERATION

After installation is complete, connect the electric power and turn on 

the power switch, located on the bottom left of the unit.  The unit will 

begin to heat. If the unit will not be used for an extended time, simply 

turn the unit off using the power switch.

IMPORTANT: READ BEFORE INSTALLING

1. Read installation manual and ALL instructions BEFORE you

    begin installation.
2. WarmlyYours recommends mounting the left vertical rail mounts 

    to a stud.
3. This product is not intended for commercial use. Residential 

    use only. Do not put the unit into water. This product is for indoor

    use only.
4. If the heating wire inside the unit fails or becomes damaged, turn

    the unit OFF and contact WarmlyYours.  Do NOT attempt to repair   

    or remove the power switch or heating wire.
5. If you encounter any difficulties while installing your towel warmer,

    call WarmlyYours for 24/7 installation support at (800) 875-5285. 
6. If a return is necessary, please use original packaging if possible.

 Installation Support  • No Nonsense™ Warranty • (800) 875-5285 • www.WarmlyYours.com

METROPOLITAN INSTALLATION MANUAL

ITEM# TW-MT-10PS-HW-HD

Reviews: