TESTING YOUR APPLIANCE LEAKAGE CURRENT
INTERRUPTER (ALCI)
• Test the ALCI periodically by pressing the white button while the
Heater is in operation. This will cause the red button to pop up
and disconnect the Heater from the power supply.
• Reset the ALCI by pressing the red button to reconnect the Heater
to the power supply.
• If this test is unsuccessful, call WarmlyYours Technical Support
for assistance at (800) 875-5285.
CONNECTION METHOD
The Under Desk Heater wall plug (
Diagram C
) has a built-in, ALCI
plug connected to an 18AWG, SVT cable, 105°C power cord, with
6A, 120 VAC rated in-line ON/OFF switch
(Diagram B)
. The plug,
cord and switch are UL listed components.
SAFETY RATINGS
• The system is water resistant and rated to IPX 7.
• The main electrical plug incorporates an ALCI for North America.
• Plug is UL and NEC (National Electrical Code) compliant.
4
DIAGRAM C
