Warmlite WL45038 Instruction Manual Download Page 3

3

www.warmlite.co

WARNING:

 

This Appliance MUST be Earthed

WIRING SAFETY FOR UK USE ONLY

 

IMPORTANT

As the colours in the mains lead of this appliance 

may not correspond with the coloured markings 

identifying the terminals in your plug, please 

proceed as follows:
The wires in the mains lead are labelled in 

accordance with the following code:

Blue neutral [N] Brown live [L] 
Green/Yellow [EARTH]

 

Plug Fitting Details (Where Applicable). The 

wire labelled blue is the neutral and must be 

connected to the terminal marked [N].
The wire labelled brown is the live wire and must 

be connected to the terminal marked [L].
The wire labelled green/yellow must be 

connected to the terminal marked with the letter 

[E].
On no account must either the brown or the blue 

wire be connected to the [EARTH] terminal.

Always ensure that the cord grip is fastened 

correctly.
The plug must be fitted with a fuse of the same 

rating already fitted and conforming to BS 1362 

and be ASTA approved.
If in doubt consult a qualified electrician who will 

be pleased to do this for you.

Non-Rewireable Mains Plug

 

If your appliance is supplied with a non-

rewireable plug fitted to the mains lead and 

should the fuse need replacing, you must use an 

ASTA approved one (conforming to BS 1362 of 

the same rating).
If in doubt, consult a qualified electrician who will 

be pleased to do this for you.
If you need to remove the plug - disconnect it 

from the mains - then cut it off of the mains lead 

and immediately dispose of it in a safe manner. 

Never attempt to reuse the plug or insert it into a 

socket outlet as there is a danger of an electric 

shock. 

FUSE

Earth

(Green/Yellow)

Fuse

Neautral

(Blue)

Live

(Brown)

Summary of Contents for WL45038

















Reviews: