Warmlite WL41008, Safety & Instruction Manual

Page: 6 / 12

6 CUSTOMER SUPPORT TEAM: +44 (0) 333 220 6056
• Please ensure that the
appliance is used on a stable,
level, and heat resistant
surface.
• If the supply cord or appliance
is damaged, stop using
the appliance immediately
and seek advice from the
manufacturer, its service agent
or a similarly qualified person.
• In the unlikely event the
appliance develops a fault,
stop using it immediately and
seek advice from the service
department.
• DO NOT attempt to dismantle
or repair any part of the heater.
This should only be done by a
qualified service agent.
• DO NOT install the heater in
washhouses or other places
with water and moist.
• DO NOT turn the heater on or
off by inserting or pulling out
the plug.
• DO NOT place things on the
heater.
• DO NOT put anything into the
air inlet and outlet.
• DO NOT use insecticide spray
or other flammable matters in
the vicinity of the heater.
• DO NOT splash oil or water
into the heater.
• DO NOT clean the heater with
water. Wipe it with a semi-wet
soft cloth.
• DO NOT wipe the heater with
chemical solvents such as
benzene, gasoline or alcohol.
Use neutral detergents only.
• Only install the heater in flat
and dry places. Keep the
heater 50cm away from
surrounding objects.
• The heater should be placed
away from gasoline, cooking
stoves or other combustibles
and heat sources.
• Use the appliance in a well-
ventilated area.
• CAUTION! DO NOT operate
the appliance with wet hands.
• DO NOT tip the appliance over
as this may cause damage to
the appliance and create a fire
hazard.
• In the unlikely event the
appliance develops a fault,
stop using it immediately
and seek advice from the
Customer Support Team.
HIGH VOLTAGE HOT SURFACE DO NOT COVER