5
www.warmlite.co
•
DO NOT
use the heater
unless the feet are correctly
attached.
• Always ensure that the heater
is placed on a firm level
surface. Ensure that the
heater is not positioned close
to curtains, furniture or any
combustible materials as this
could create a fire hazard.
• Allow a 50cm safe area
around the heater on the top
and sides and a 120cm safe
area at the front of the
appliance.
• The heater must not be
located immediately below
a mains socket outlet.
•
WARNING!
DO NOT
cover
the heater as this may lead to
a fire risk.
•
WARNING! DO NOT
obstruct
any of the openings of the
heater.
•
WARNING! DO NOT
insert
any object through any
openings on the heater.
• Check from time to time for
accumulated dust.
•
WARNING! DO NOT
use the
heater in areas where
flammable liquids are stored
or where flammable fumes
may be present.
•
CAUTION!
In order to avoid a
hazard due to inadvertent
resetting of the thermal cut-
out; this appliance must not
be supplied through an
external switching device
such as a timer or connected
to a circuit that is regularly
switched on and off by the
utility.
•
DO NOT
operate the heater
on a timer or leave on
overnight.
• When not being used, please
unplug the heater from the
mains socket.
• Keep the mains lead away
from the hot body of the
heater and ensure that it is
not pulled tight between the
socket and the heater.
•
WARNING! DO NOT
use the
heater in the immediate
surroundings of a bath, a
shower, a swimming pool or
similar indoor locations and
DO NOT
touch hot surfaces.
• Always unplug the heater and
allow it to cool before moving
it from one location to
another.
•
WARNING! DO NOT
attempt
to dismantle or repair any part
of the heater. This should only
be done by a qualified service
agent.
• In the unlikely event the
appliance develops a fault,
stop using it immediately and
seek advice from the service
support team.
HIGH VOLTAGE
HOT SURFACE
DO NOT COVER
