14 August 2019
All dimensions are in mm
Copyright
9
Due to continued product improvement, Warmington Ind LTD reserves the right to change product specifications without prior notification.
BRICK LAYOUT AND FITMENT
Step 1:
Unwrap supplied bricks, open door and
locate the brick support brackets inside
the firebox on both sides.
Step 2:
Place brick inside firebox hard against
firebox side & sit down on firebox base
using the base brick support bracket first.
Step 3:
Then slide fire brick back into back
brick support bracket. This is the same
for both bricks on each side.
Note:
The Lewis and Lindis are supplied with 2 x firebricks (one each side). The McKenzie is supplied with 4x firebricks (2x large
-
240x240mm and 2x small
-
240x125mm). The small bricks sit beside and to the back of the larger bricks (on each side) in the McKenzie.
BAFFLE FITMENT AND REMOVAL
Step 1:
Tilt Southern Series baffle on an angle and slide into the firebox.
Make sure you have the correct size baffle for your model of fire.
Note: for the McKenzie, place K
-
wool on top of the baffle.
Step 2:
Rotate baffle 90 degrees and push baffle to back of firebox.
Step 3:
Move baffle forward to sit on pins.
Step 4:
Move the back of the baffle up to sit on the pins at the back of
the firebox.