4
VERTICAL ASSEMBLAGE OF RADIATORS:
Radiators should be carried and assembled
without being unpacked. The unpacked
radiators must not be carried by being hold
by custards aside.
3. The stocking must be made in a ventilated
and dry place without unpacking radiators.
4. In the course of stocking, radiators must
be stacked by no more than 10 pieces.
5. The maximum functioning pressure of
radiators is 10 Bars.
6. Radiators are delivered with assemblage
accessories: 3 stoppers, 1 drain and fixing
pins with ankles and screw factories. These
accessories must have to be assembled in
accordance with the figure 1. The fixing pins
must be fixed in order to guarantee stability
and to support the weight of the filled
radiator.
a) The Warmhaus Radiators have to be
assembled by using the delivered fixing pins
(see it in the Figure 1).
b) The position of the fixing pins in comparison
with the radiator is noted in the Figure 1. The
minimal distance between radiator and floor
should not be less than 100 mm.
c) Having drawn on the wall, the position of the
fixing pins and of installed plugs, to take up
the lower pins of the radiator. Assembly
then, the top hanger brackets without
tightening the screws.
7. The warranty period is 10 years from the
date of delivery.
ATTENTION THE POSITION OF THE LEGS OF
FIXING MUST RESPECT COAST B OF THE FACE
1 THERE.
d) After positioning of the radiator, tighten the
top hanger brackets.
e) Assembly the stoppers after the chosen
assemblage chosen as well as the air vent
plugs which will be imperatively on the
upper part of the radiator.
f) Connect the feeding of the installation by
taking care to allow these ones to dilate
without putting pressure on the radiator.
ATTENTION !
• This product is only conceived to be used a
system of central heating or a system of hot
water tank of central heating, with a purpose
to guarantee a residential heating or an
individual heating.
• The assemblage of this product must be made
by a competent skilled person in this activity.
• Control if the radiator which you received is a
good model and, if it has good dimensions
before unpacking.
• Do not throw the packing before having
proved that the small packet containing the
linking and assemblage rooms is in your
possession.
• We recommend you to take personal security
measures in the course of radiator
assemblage.
The necessary specifications of the water used in
a radiator have to be:
a) pH: minimum 9,5 - maximum 11,5
b) Complete hardness: maximum 30 ppm
CACO3
c) An oil dumping device must be set up on
heating circuit to have no air and oxygen
presence in the radiator.
Hardness of the water used in the circuit of a
central heating should not be higher than
aforementioned value. If the hardness of the
used water is higher than aforementioned value
a corrective action or a treatment will have to be
set up.
The deterioration of the radiator due to
different problems of water cancels
the guarantee.
1. Do not unpack radiators in the course of
construction work or renovation and as long
as painting, coating or other jobs are finished.
You can take radiators up, if necessary,
without unpacking them.
2. Pay attention to the fact that the products are
not thrown on the facedown, in the course of
manipulation and assemblage.
