Wärme WH-20P, User Manual

Page: 10 / 12

Heating
Modes
05
For more information visit: www.designerheater.com
10
Programmed weekly heating mode
1. To enter Programmed weekly heating mode, press the key and use the and arrows until the
is highlighted on the bottom left hand side of the LCD display.
2. Press
3. The cursor will then move to the days of the week down the left hand side of the LCD display.
4. When the 1 is highlighted, use the and arrows to select the day to be programmed.
5. When the 1 is highlighted, press the key to start programming.
6. Press the key. The cursor will highlight the different heat modes on the right hand side of the menu (comfort,
economy, frost free).
7. With the desired heat mode selected, press the arrow and move around the segment timer until you reach a time
you want to change the heat mode.
8. Press to change the heat mode again. Use the arrow until you reach the next time you want to change the
heat mode.
9. Repeat this process as desired until you reach midnight.
10. Once you have one day programmed, you can copy it on to the following day. To do this, move the cursor to
highlight the next day (for example 2), and simply hold down the key for 5 seconds.
TIME
PROG
PROG
OK
OK
OK
24-HOURS SCALE
THE DRAWING ILLUSTRATES THE FOLLOWING SETTING.
This mode is designed to represent a segment plug timer. Please note: the circle that goes around the time and
temperature starts at midnight and each dot represents half an hour.