Warm Tech WTRIC1000-4, Original Instructions Manual

Page: 51 / 65

Sensor Mode
When the device switches to sensor mode, if no
human or moving objects are detected,
the device will automatically shift to a more energy-
efficient mode.
If detecting human or moving objects,
it automatically jumps to the SENSOR MODE
interface.
If you want to use microwave body induction function,
you need to open microwave induction system inside
the radiator.
The choice time is: "0", "15", "30", "45" and "60".
When the radiator is in Sensor Mode ,the radiator will automatically shift to a more energy-efficient
mode if there is no movement within the room. If the radiator detects movement, It will automatically
swift back to the set temperature setting.
If you want to use Sensor Mode , you need to press the on/off key to enter stand-by
mode.Press and hold the plus key.Press the Mode button until Sensor Mode symbol appears
.
NOTE: The function must be set for sensor symbol to appear. If the functions is set at “0”,the symbol
will not appear. You can choose for the sensor time setting to”0”,”15”,”30”,”45” and “60” minutes of no
movement being detected. To change this setting please go to “Other functions” below.
Remarks: It can only be used in comfort mode;
How the SENSOR MODE works—example if the radiator is set to:
Detecting time is set to 15 minutes

In the first 15 minutes if nobody is detected – the temperature will drop to 1 °c below the comfort
mode setting.
 In the second 15 minutes if nobody is detected – the temperature will drop to 2°c below the
comfort mode setting.
 For the third 15 minutes if nobody is detected – the temperature will drop to 2°c below the
Economy mode setting.
 After 24 house if nobody is detected – the temperature will change to Frost prevention mode.
 Once somebody is detected – the temperature will change to Economy mode-18 °c.

If in the next 15 minutes if some body is detected – the temperature will change to 2°c below
the Comfort mode setting.