5
6. Remove the Immersion Blender from the pot only after blender has come
to a complete stop.
nOte: Always unplug Immersion Blender after each use. Keep the
appliance out of reach of children.
• To prevent splattering, be careful never to remove the Immersion Blender
from liquid while in operation.
• When a recipe calls for ice, use crushed ice (not whole cubes) for
best results.
NOTE: If a piece of food becomes lodged in the protective guard surround-
ing the metal blade, follow the safety instructions noted below:
1. Release the power button and unplug the unit from the electrical outlet.
2. Once the power source has been disconnected, use a spatula to carefully
remove the food lodged in the blade guard. Avoid injury. The blade is
sharp. DO nOt USe YOUr fInGerS tO reMOVe lODGeD
OBjeCtS.
3. After the lodged food has been removed, plug the unit back into its power
supply and continue processing.
CleanInG InStrUCtIOnS
tHe QUIk StIk PlUS
™
IMMerSIOn BlenDer MUSt Be
CleaneD anD DrIeD aCCOrDInG tO tHe fOllOWInG
InStrUCtIOnS after eaCH USe.
for food Service applications
• Wash, rinse, and sanitize the stainless steel portion of the Quik Stik
Plus
™
prior to initial use, after each use, or whenever it will not be used
again within a period of 1 hour.
• Clean and sanitize the plastic motor housing prior to initial use and
after each use.
• Washing solutions based on non-sudsing detergents, and chlorine-based
sanitizing solutions having a minimum chloride concentration of 100
PPM are recommended.
The following washing, rinsing, and sanitizing solutions, or their equivalents,
may be used.
DIlUtIOn
SOlUtIOn PrODUCt
In Water
teMPeratUre
Washing
Diversey Wyandotte 4 Tbls./Gallon Hot 115°F (46°C)
Diversol BX/A
Or CX/A
Rinsing
Plain Water
Warm 95°F (35°C)
Sanitizing *Clorox
®
Institutional 1 Tbl./Gallon Cold 50-70°F (10°-21°C)
Bleach
*Clorox
®
is a registered trademark owned by the Clorox Company.
Summary of Contents for Quik Stik Plus WSB40ARG
Page 2: ......
Page 31: ...31 NOTES ...
