Waring PRO ES1500 Vero Barista User Manual Download Page 4 | Manualshive

Page: 4 / 20

Waring PRO ES1500 Vero Barista User Manual Download Page 4

4

CONTENTS

Important Safeguards ................................................................. 2
Parts & Assembly ........................................................................ 5
Before First Use ........................................................................... 7
Ground Espresso Instructions ..................................................... 8
Pod Holder Instructions .............................................................. 9
How to Texturize Milk ................................................................ 10
Dispensing Hot Water ............................................................... 12
Beverage Suggestions .............................................................. 12
Cleaning & Maintenance ........................................................... 13
Troubleshooting ......................................................................... 16

POWER CORD INSTRUCTIONS

This appliance has a polarized plug (one blade is wider than

the other). To reduce the risk of electric shock, this plug is

intended to fit into a polarized outlet only one way. If the plug

does not fit fully into the outlet, reverse the plug. If it still does

not fit, contact a qualified electrician. Do not attempt to modify

the plug in any way.
This appliance is for 120 volt use only and should not be used

with a converter.

«
...
2
3
4
5
6
...
»

Summary of Contents for PRO ES1500 Vero Barista





















Reviews:

No comments