warequip P2GOUltiMate, Instruction Manual

Page: 6 / 15

5. BATTERY CHARGING
To ensure the best performance and maximum battery life, we recommend frequent battery
charging. Your
Trolley comes with an on-board battery charger for you ease and convenience.
The console battery display makes charging simple and easy. Follow these steps for battery
charging.
1. The console battery display:
Only when battery is properly charged is the right-most green LED lit. As the battery’s state-of-
charge decreases, successive LEDs light up, only one on at a time. The 3
rd
–from-left red LED
flashes, Indicating “energy reserve” (70% depth of discharge. The 3 left-most LEDs alternately
flash, indication “empty” (80Kg depth of discharge)
2. On a level dry surface, turn off the power key and plug the AC cord into the charger socket
located on the fibre-glass compartment. Plug the other end of the AC cord into the well
grounded outlet.
3. Charge the battery for 6-8 hours depending on the usage. Before charging disconnect the AC
cord, insert key into tiller and check if all green lights are on.
4. There is no possible way to overcharge the battery since the charging voltage in the floating
stage is set constant. In general, you may start charging after work and disconnect it in the next
morning.
Warning
You must turn off power before charging. Otherwise it may damage the electric circuit.
6. MAINTENACE SCHEDULE
In order to obtain the best performance and last its service life, please maintain your unit
according to the following schedule and instructions.