WAREMA WMS-ZP, Setting Instructions Manual, Page: 4 / 14

Commissioning
Page 4 | 14 2012324 [Rev. 1 - en]/2015-12-08
2.3 Setting the motor limit positions
INFO
For commissioning, voltage must be applied to the drive.However, voltage should only be applied to one product at a
time.
The limit positions are not set . The limit positions can also be set via the WMS Central transmitter (as of version D) or
the WMS toolkit PC software (as of version 2.00).
The direction of rotation of the drive is adjusted automatically after "setting the motor limit positions". ( see Page 9 ).
When "setting the motor limit positions", the drive is in "dead man's mode" ( see Page 9 ).
Chec
k
Is t
he hand-held tr
ansmitt
er learned in?
Press the button to wake up the hand-held trans-
mitter.
WMS Hand-held trans-
mitter:
WMS Hand-held trans-
mitter basic:
If lights up red, the
hand-held transmit-
ter is not learned in.
Learn in the hand-
held transmitter in-
to the product ( see
Page 8 ).
A
If
A
and are flash-
ing orange, the hand-
held transmitter is not
learned in. Learn in
the hand-held trans-
mitter into the product
( see Page 7 ).
W
aking up t
he
hand-held tr
ansmitt
er
Press the button to wake up the hand-held
transmitter.
S
tar
ting t
he
se
tting pr
ocedur
e
Press the mode button briefly with a pointed ob-
ject.
WMS Hand-held trans-
mitter:
WMS Hand-held trans-
mitter basic:
The LED begins
flashing.
The transmission
LED begins flash-
ing.
Dele
ting t
he limit positions
Press the control button briefly.
"Klack-Klack"
The drive clicks twice.
Se
tting t
he mo
tor limit positions
The limit positions are deleted.