warema_890558_alhb_en_v5•2022-02-01
We reserve the right to carry out improvements
36
Wisotronic 1-channel
Installation instructions
7 Commissioning
CAUTION
Before the unit can be commissioned, all components must be connected.
The Wisotronic automatically detects whether sensors are connected and
which ones. The Wisotronic cannot optimally control the sun shading product
and display measuring values until all required sensors are connected.
Refer to the associated operating instructions prior to commissioning to op-
timally adapt the control to your requirements. There you will find a complete
overview of the Wisotronic functions.
In the individual menus of the manual project setup
(
see Chapter 8 on page 43
), the experienced user can set each param-
eter individually.
7.1 Planning with
Quickstart
Quickstart offers support to the specialist dealer with the creation of a pro-
ject, making it easy to make the basic settings. It always begins with a new,
empty project.
Switch on the mains supply.
The WAREMA log appears during the start procedure. The Quickstart menu
appears as soon as the Wisotronic is operational.
In just a few steps, you can commission the device with the most important
basic parameters.
The Wisotronic automatically detects the connected components when the
operating voltage is switched on (e.g. the weather station).
Commissioning
