warema_890558_alhb_en_v5•2022-02-01
We reserve the right to carry out improvements
23
4.4.3 Mounting in pattress box
A special pattress box (art. no. 1002 837) is available as an alternative.
The Wisotronic can be mounted nearly flush with the wall in the pattress box;
the control panel protrudes approx. 7 mm above the installation surface.
2
3
Fig. 9
Installation in surface-mounted housing
After the lines are connected, the unit is attached with the included counter-
sunk screws.
Do not tighten the screws too tightly as this might damage the base plate.
Ensure that none of the connecting lines are pinched during installation.
Installation
