3
2024843_0•en•2018-12-01
We reserve the right to make technical modifications
Fig. 5
Cover plate with LED and keypad
LED flash patterns:
Communication
LED green
Error
LED
red
Statement
Flashes
irregu-
larly
X
SMI communication,
no fault
Flashes
irregu-
larly
X
SMI communication,
faults occur (the LED
is deactivated during
the motor search &
initialisation)
Lights
up con-
stantly
X
X
Unparameterised - SMI
bus not yet commis-
sioned or no motors in
the internal motor list
Maintenance
There are no parts inside the device that require mainte-
nance.
Liability
Failure to comply with the product information in these in-
structions and any use of the device other than its intend-
ed use may result in the manufacturer refusing to honour
warranty claims for product damage. In this case, liability
for secondary harm to persons or damage to property will
also be excluded. Observe the information in the operating
instructions for your sun shading system. The automatic
or manual operation of the sun shading system while iced
over as well as using the sun shading system during se-
vere weather may cause damage and must be prevented
by the user through suitable precautions.
Disposal
After use, the device must be disposed of according to
legal regulations or turned in to your local recycling centre.
