background image

7

890463_k•en•2019-10-01

We reserve the right to carry out improvements

The weather station cyclically sends a so-called "heartbeat 

pulse" to all receivers into which it is learned.
If the receiver does not receive measuring values for 24 h, 

it is assumed that the weather station has failed (heartbeat 

function). The receiver moves the connected product to 

a safe position. Depending on the type of sun shading 

product, operation is limited or impossible until a new valid 

value is received. This is a safety function and not an error.

CAUTIO

C

  

If you force the sun shading system to move 

down by repeatedly activating the DOWN 

button when the weather station has failed, 

the safety functions are not active. The sun 

shading system may become damaged  

(e.g. due to high winds).

Uechnical data

CEWFS Weather station eco Min.

typ.

Max.

Anit

Supply

Operating duration with full 

buffer (in darkness (0 lx)

18

Hr.

Operational at 5 klx after...

(5 klx corresponds roughly 

to the brightness in shade)

30

min

Operational when 

connection via USB 

charger

5

min

AF transmitter

Transmission frequency

433.92

MHz

Transmission power

10

dBm

Range (environment 

without interference)

30

m

Wind measurement

Wind speed

2

25

m/s

Locked time in case of 

wind alarm

10

min

Brightness measurement

Brightness

5

100

klx

Switch-off delay  

(if brightness falls below 

60% of the set limit value)

10

min

CEnclosure

Dimensions in mm

(L×W×H)

278 × 118 × 207 mm

Degree of protection

IP43

Safety class

III

Miscellaneous

Conformity

   

Available at 

www.warema.de/ce

This device meets the EMC directives for use in 

residential and commercial areas.

WAREMA Renkhoff SE declares herewith that this

radio system type [EWFS Weather station eco] is in compliance 

with the current guidelines.

Cmbient conditions

Operating and storage 

temperature

-20

60

°C

Humidity

(non-condensing)

10

40

100

%RH

Degree of soiling

2

Crticle numbers

EWFS Weather station eco

1002 810

USB charger

1002 879

WAREMA Renkhoff SE

Hans-Wilhelm-Renkhoff-Strasse 2

D-97828 Marktheidenfeld

Germany

Summary of Contents for EWFS Weather station eco









Reviews: