9
!
A
(A)
Flat Washers
Expansion bolts (HH)
Spring washers
Nuts
IMPORTANT:SCREWS MUST BE
TIGHTENED TILL SNUG
!
STEP 2ACoNCRETE CEILING
Assembly— Hanging the Fan
3.Description of mounting bracket
WARNING: To reduce the risk of fire,electric shock or other
personal injury, mount the fan only to an outlet box or
Supporting system marked acceptable for fan support and
use the mounting screws provided with the outlet box.
1.Lossen the two outlet boxscrews in the
outlet box.
2.Pass the 120-Volt supply wires through
the center hole in the mounting bracket (A)
3.Fix the mounting bracket (A) to the outlet
box(LL)Note that the plane of mounting
bracket (A) is oriented towards the outlet
box (LL).
4.Tighten the two mounting screws
MOUNTING OPTIONS
For wooden ceiling, use wood screw to drill on the
wooden beam or the junction box" to fix the hanging
bracket (selection is made according to actual
requirements of the customers).
STEP 1ACoNCRETE CEILING
SEITCH OFF THE ELECTRICAL MAINS AT THE CIRCUIT BREAKER FUSE BOX
1.Use the Mounting Bracket (A) as a guide, mark the spots where the 4
Self Tapping Screws (Il) will be drilled.
2. Remove the Mounting Bracket (A),dril 4 holes for 3MM diameter;instal
the mounting bracket onto wooden ceiling with the 4 Self Tapping Screws
(II)& Washers.
!
IMPORTANT: SCREWS MUST BE TIGHTENED TILL SNUG
For concrete ceiling,use the percussion bit with diameter
6mm to dill holes according to the length of expansion
screws. Then use the attached expansion screws to fix
the hanging bracket onto the ceiling (selection is made
according to actual requirements of the customers).
1. Use the Mounting Bracket (A) as a guide, mark the spots where the 2
Expansion Bolts (ll) will be drilled.
2. Remove the Mounting Bracket (A),drill 2 holes and insert 2 Expansion Bolts
Bolts (2) into the concrete ceiling. install the mounting bracket and secure
with Flat Washero,Spring Washers and Nuts.
SEITCH OFF THE ELECTRICAL MAINS AT THE CIRCUIT BREAKER FUSE BOX
Note: according to different ceiling materials,,the bracket is fixed with different screws. The ceiling of the fixed bracket shall not
be less than 12mm to prevent danger caused by screw loosening. After the suspension support is completed,it shall be able to
safely withstand the tensile test of more than 55kg.
!
Wooden ceiling
CONCRETE CEILING
(A)
II
