5.
Tighten cam locks on both front panel and back panel.
6.
Line up the front drawer panel with the front face panel.
Use pencilled lines for accuracy.
The bottom of the drawer should be flush with the drawer front face.
Screw to secure.
7.
Turn drawer upside down.
Drawer runners come in pairs (left and right).
Ensure the correct runner is used for each side, wheels towards the drawer back as shown.
Screw to secure.
For drawers to operate correctly, make sure the wardrobe tower is on a level surface and square to the
back wall. If the floor is not level then floor packers may be required (not included).
