http://www.wansview.com
5.1.3 UPnP
Setting
If you enable UPNP, once the IP camera is connected into the LAN, it will communicate
with the router in the LAN to do the port-forwarding automatically.
Below Figure 19, tick “Using UPNP to Map Port” and the setting are completed. It will
show the setting is successful or not.
Figure 19 UPnP settings
Before using UPNP function, please make sure the router’s UPNP function has been
triggered. Not all the routers support UPNP perfectly. Please test if the router works well
with the equipment, if not, we would suggest you to disable this function and do the
port-forwarding manually.
5.1.4 DDNS
Setting
Please refer to the content in 4.3.
5.1.5 MSN
Setting
Figure 20 MSN settings
16
