Chapter 5
Display
The on-board VGA interface of the NEAT-470 supports traditional analog
CRT monitors and a wide range of popular LCD, EL, gas plasma flat panel
displays. It can drive CRT displays with resolutions up to 1024x768 in 256
colors. It is also capable of driving color panel displays with resolutions of
640x480 in 256K colors.
5.1 Drivers and Utilities
5.1.1 Microsoft Windows 3.1
The graphic installation program,SETUP.EXE, supports a simple
installation procedure of the display driver program. You may install these
drivers either through Windows or in DOS. To use Setup, follow the steps
as below:
Ensure that MS Windows 3.1 is up and running properly, using the
standard VGA driver. Exit from Windows.
Place
the
Windows 3.1x display Driver Diskette
in drive A. Type
A:<ENTER>
to make it be the default drive. Type
SETUP <ENTER>
to run the drive SETUP program. Press any key to get to the
application list. Using the arrow keys, select
Windows Version 3.1
and press
<ENTER>
key. Press <
ENTER>
key to select
All
Resolutions
, then press <
END>
to begin the installation. At this point,
you will be asked for the path to your Windows system directory
(default C:\ WINDOWS). When the installation is complete, press
any key to continue. Press
<ESC>
key followed by
Y
to exit to
DOS
.
Change to the directory where you installed Windows (default
C:\WINDOWS )
Type
SETUP<ENTER>
to run the Windows Setup program. It will
show the current Windows configuration. Use the “up” arrow key to
move to the Display line and press <
ENTER>
. A list of display drivers
will be shown. Use the arrow keys to select one of the drivers starting
with an asterisk (*) and press
<ENTER>
.
Follow the directions on the screen to complete the setup. In most
cases, you may press
<ENTER>
to accept the suggested option.
When Setup is done, it will return to
DOS
. Type
<WIN>
to start
Windows with the new display driver.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com