WANSA WP42K1, Owner'S Manual

Page: 16 / 36

This TV set has three methods to set channels, which are respectively full automatic,
manual search fine tune.
In this section, how to use the remote control to set channel is explained. You can
also use buttons on the TV set to set channel.
Automatic search
1
Press MENU button and then use VOL+/- button to select the
Tuning menu.
Note : 1.The Tuning menu will be in normal
TV mode;
2. When the Tuning Lock is setting as Off, it is selectable.
only operated
2
Press VOL+ button and then use CH+/- button to select
"Auto Search" item.
3
Press VOL+ button to ensure automatic search function work.
After the search has finished, all channels now playing program
will be automatically preset in order and backtrack the 0 channel.
4
Press MENU button to stop automatic search function.
Searching Channel
Search set
1
Press MENU button and then use VOL+/- button to select the
Tuning menu.
Press VOL+ button to enter the submenu.
4
Press CH+/- button to select Search option, and use VOL+/-
button to
2
Press VOL+ button and then use CH+/- button to select
"Search Set" item.
3
start searching.
5
Press OK or MENU button to stop searching.
When searching successfully for the channel, the search
stopping automatically and save to the current channel.
If the picture and/or sound are poor, try using the FINE
TUNE feature. Do not use this feature unless reception
is poor.
15
menu
OK
OK
OK
OK
OK CANCEL
OK
CANCEL
OK
OK
OK
OK
OK
DOWN UP
menu
menu
menu
menu