2.11 Tighten the 2 fan bolts.
2.12 Re-lock the set screw of the rods.
Page 1: ...e the Wing Nuts by Thumb Nuts 1 1 Push the heating plate and twist the wing nuts clockwise to unscrew wing nut 1 2 Twist the thumb Nut anticlockwise to tighten the thumb nut 1 3 Repeat 1 1 and 1 2 to...
Page 2: ...2 3 Move the extruder off the extruder plate So you can see the 6 bearing locking bolts 2 4 Unscrew the 6 bolts So you can detach the extruder plate and the aluminum bearing blocks 2 1 Lose the 2 Fan...
Page 3: ...d move the aluminum block off the rods 2 7 Insert the 2 new plastic bearing block into the 2 rods 2 8 Re insert the 2 rods back to locking place 2 9 Re install the 6 locking bolts 2 10 Re install the...
Page 4: ...2 11 Tighten the 2 fan bolts 2 12 Re lock the set screw of the rods...
