- 25 -
Replacing gearbox oil
（
Fig 26
）
Suggestion gearbox oil :
SAE 80W/90
（
North Cold Area use anti-freezing oil
）
Oil container
Resolving capacity
：
0.11L
Replacing capacity
：
0.09L
•
Make the motorcycle on the Stand
•
Take apart the immiting bolt (2), and the spilling bolt (1).
NOTICE: The engine must be warmer when
spilling and the vehicle must be steady by main
stand. Make sure the Engine is empty
•
Reinstall the spilling bolt after clean. And screw up.
•
Inject 100ml to engine through immit bolt
•
Install immit bolt and screw up.
Fig26
2
1
1
- 26 -
SPARK PLUG
（
Fig 27
）
Specification of Spark Plug
：
BPR7HS ,BP7HS (NGK), E7TC , E7RTC
•
Disconnect the spark plug cap, and then use the special handle to remove Spark plug.
•
Check if the spark plug electrodes and
the
center
porcelain
head burned, accumulative carbon, etc.
If the spark plug
is burned out, replace new spark plug
Use spark plug cleaner to clean the deposits, or use a wire brush.
Adjust the Spark Plug gap between
（
0.6
～
0.7
）
mm.
•
Don
’
t use an unspecified spark plug.
Replacing fuse
The specified electric current of the total fuse is 15 A, which is in Battery.
If the connection is not good, the fuse will overheat and breakdown.
Do not use brass wires to replace the recommended.
(0.6
～
0.7)mm
1
2
Fig 27
