background image

- 34 - 

.

Emission Control System Warranty Statement 

 
Wangye  USA  Co.,  LLC

  is  pleased  to  explain  the  emission  control  system  warranty  on 

Highway  Motorcycle.  New  Highway  Motorcycle  must  be  designed,  built  and  equipped  to 
regulations  and  standards  of  the  United  States  Environmental  Protection  Agency  and  the 
California Air Resource Board and free from  defects in  material and  workmanship that  may 
keep it from these requirements in the all applicable regulations. 
 
Wangye USA Co., LLC must warrant the emission control system on the highway motorcycle 
for 5 years or 6,000 km, whichever comes first, provided that there has been no abuse, neglect 
or improper maintenance of highway motorcycle. 
 

1. Period of Warranty 

The period of warranty shall be one year on delivery, during this period of warranty: 

(i).

 

Any part  defective by reason  of  the  manufacturer

s faulty  workmanship  or  material will 

be replaced or repaired free of charge; 

(ii).

 

Any  repairs  or  adjustments  made  necessary  by  reason  of  the  manufacturer

s  faulty 

workmanship or material will be performed free of charge. 

Emission control system  may include  parts such as the carburetor or fuel injection system, 
the  ignition  system,  catalytic  converter  and  engine  computer,  if  it  is  equipped.  Also 
included may be hoses, belts, connectors and other emission-related assemblies. 
 

2. Responsibilities of Customer 

To obtain repairs under warranty, the customer must: 

(i).

 

Ensure that the motorcycle is properly operated, maintained and stored as specified in the 

- 35 - 

Owner

s Manual; 

(ii).

 

Give  notice  to  dealer  approved  by  Wangye  USA  Co.,  LLC  or  other  qualified  service 
facility of any and all apparent defects immediately upon discovery, and make the entire 
motorcycle  available  at  the  time  for  inspection  and  repair  at  the  dealer

s  place  of 

business; 

(iii).

 

Provide proof of warranty coverage to dealer; 

(iv).

 

Authorize  the  dealer  to  tear  down  the  motorcycle  for  diagnostic  evaluation  should  it  be 
required. 

All warranty repairs must be done by the dealer and final approval of any repairs rests with 
Wangye  USA  Co.,  LLC.  All  parts  replaced  become  the  property  of  Wangye  USA  Co., 
LLC. 
 

3. Exclusion 

This  warranty  does  not  cover  the  repair  or  damage  resulting  from  abuse  or  neglect  of  the 
motorcycle. Examples of abuse and neglect include, but are not limited to: 

(i).

 

Racing and competition; 

(ii).

 

Use of lubricants, oils and fuel/oil mixture other than those recommender in the Owner

Manual,  improperly  installed  accessories  and  use  of  parts  or  accessories  that  are  not 
equivalent in design and quality to genuine Wangye parts; 

(iii).

 

Damage  as  a  result  of  accidents,  collisions,  contact  with  foreign  materials,  impact, 
submersion or use of the motorcycle after discovery of a defect; 

(iv).

 

Appearance-related  damages  of  body  parts.  Examples  of  such  damages  include  but  are 
not limited to: scratches, dents, fading, flaking and peeling; 

(v).

 

Motorcycle which has been modified in any way from the standard specifications shown 
in the Owner

s Manual, for example, the odometer has been altered; 

(vi).

 

Normal  wear  and  tear,  corrosion  and  routine  maintenance,  such  as  the  recommended 

Summary of Contents for WY50QT-58






















Reviews: