- 11 -
The free path of rear brake handle (Fig 14, Fig 15)
Measure the distance of rear brake pedal before detent function .the free path should between
10-20mm, take the tail of brake handle as standard.
Adjust nut (A): increase the distance of free path
(B): reduce the distance of free path
The axle pin2 should touch closely with nut (1) groove after adjust.
Fig 14
Fig15
- 12 -
1
2
Brake Machinery
’
s wear indicate mark (Fig 16)
(1). Reference marks.
(2). Indicate marks.
Notice :If totally brake. Change the brake
block when reference marks and Indicate
marks must be situated a straight line.
Tire
Check the tire pressure regularly and adjust.
Check before the tire cooled
Check if there any metal trash or
gravel in the groove of tires
WARNING:
If the tire pressure dose not accord with the standard, it will properly cause the traffic
accident.
It is dangerous that use the worn tire, It will have effect to friction between tire and rode.
Maybe make difficult from drive or accident.
Fig 16
