W&T Electronics 58210, Manual

Page: 19 / 63

19
W&T
TCP/IP Configuration
Subject to error and alteration
3.2.1 Serially deactivating the DHCP-/BOOTP-Client
The DHCP-/BOOTP function of the LAN-Modem can be turned
off when serially assigning the IP address. We recommend
doing this in all cases where it is not absolutely necessary to
use DHCP/BOOTP to assign the IP.
To deactivate the DHCP-/BOOTP client, attach the option „-0“
directly after the IP address (no spaces) and confirm your
entry with <
Enter >.
Example:
xxx -> Com-Server
IP no.+<ENTER>: <- Com-Server
172.17.231.99-0 -> Com-Server
172.17.231.99 <- Com-Server
You can always reactivate the function later using the
Telnet configuration under
SETUP System
r
SETUP TCP/IP
r
BOOTP Client .