Maintenance
Lyla | Instructions for Use | RIN-210 ENG Rev02 | 15/09/2022 | © W&H Sterilization Srl
71
800-cycle or biannual maintenance
SEQUENCE OF PROCEDURES TO CLEAN THE WATER TANKS
To clean the water tanks, proceed as follows:
1
"Prepare the sterilizer for cleaning the water tanks" below.
2
"Access to the water tanks" on the next page.
3
"Clean the water tanks" on page 74
PREPARE THE STERILIZER FOR CLEANING THE WATER TANKS
Proceed as follows:
1
Switch OFF the sterilizer and disconnect the mains cable.
2
Completely drain both water tanks (see "Draining the used and clean water tank" on page 80).
3
To drain the detergent solution during the subsequent cleaning, leave the drain tube attached to the drain connection of the tank you want to
clean.