Overview error messages
> Standby mode:
Press the Start button.
> Device not connected to the
mains supply:
Connect the power supply.
> Electronics defective:
Send to an authorized W&H
service partner.
> Rotate the care attachment
manually.
> Cartridge
W&H Service Oil F1, MD-200
or
W&H Activefluid, MC- 1100
empty or not in the unit:
a)
Replace / insert the
cartridge.
b)
Press the Start button
1x.
c)
Carry out the initial filling.
> Electronics defective:
Send to an authorized W&H
service partner.
> Air supply fails.
a) Re-establish the
main air supply.
b) Press the Start button 1x.
c) Carry out the initial filling
> Cover opened during the
preparation process:
a)
Close the cover.
b)
Press the Start button 2x.
> Waste drawer full:
Empty the waste drawer
Press the Start button 1x.
> Waste drawer open or not in
the unit:
Close or insert the waste
drawer.
> Waste drawer opened
during the preparation
process:
a)
Close the waste drawer.
b)
Press the Start button 2x.
> Preparation process not
correctly completed:
Press the Start button 2x.
> Start button pressed during
the preparation process:
Press the Start button 2x.
Sensor dirty or covered:
> Wipe-disinfect the sensor.
> Check position of hose
external cleaning ring and
clip in place if necessary.
> Press the »Start« button 2x,
the preparation process will
then start.
50741 AEN Rev. 003 / 10.02.2016
Subject to alterations.
W&H Dentalwerk Bürmoos GmbH
t
+ 43 6274 6236-0
Ignaz-Glaser-Straße 53, Postfach 1
f
+ 43 6274 6236-55
5111 Bürmoos,
Austria
wh.com
Quick Start Manual for Assistina 3x3 / 3x2
