WANDERS SQUARE 60 G, Users Manual & Installation, Page: 24 / 60

24
Target value for the volume of the space to be heated:
Not all spaces meet the present insulating values. According to DIN 18893, the following values can be taken for
the volume of the space to be heated:
If heating circumstances are favourable: Calculate according to DIN 4701
In less favourable circumstances: 90 m3 (60) - m3 (68) - m3 (75)
In unfavourable circumstances: 70 m3 (60) - m3 (68) - m3 (75)
For temporary heating you may assume a reduction of 25% for the volume to be heated if the interval is more
than 8 hours.
Protection of the wall
Walls made of combustable construction parts
Supporting walls in steel construction
Intergrated pieces against stove
Intergrated pieces in the wall behind
Other walls
Wall thickness < 10 cm
Wall thickness > 10 cm (e.g. a brickwork wall)
Table for thickness of insulation cf thickness of the wall
Wall thickness
10 cm
X
X
X
X
X
-
Insulation
back side
8 cm
on the side
8 cm
under side
6 cm
Convection
house
X
X
X
X
X
-
▲
Table gives the insulation thickness to be used for a given wall thickness to protect intergrated wall.
Table for insulation material.
Please note! Only use products given in the grey-shaded part.
Insulation Packed Thermal conduction Maximum Density
appl. temp.
no Article no Form no packed no ºC no Kg/m3
10 Mineral wool 01 Bands 01 Stitched mats 10 100 02 20
11 Glass wool 02 Loose wool Stitched mats 12 120 03 30
12 Rock wool 03 Wool 02 Stitched mats 14 140 04 40
13 Waste products Granule G. curve 2 16 160 05 50
04 Felt 06 60
05 Lamella mat 10 Flakes 07 70
G. curve 1 08 80
06 Stitched into 11 Flakes 09 90
mats
07 Plates G. curve 2 10 100
08 Scales 72 720 11 110
09 Segments 20 Plates 74 740 12 120
10 Interwoven G. curve 1 76 760 13 130
21 Plates
G. curve 2 18 180
99 Otherwise 99 Single 99 99
▲
Select the insulation material from this table. PLEASE NOTE: Group 99 is NOT ALLOWED.