Wamsler Myro, User Instruction, Page: 25 / 88

25
1.2 Installation
Fuels
Low smoke, trouble-free operation of the stove and a supply of heat at the nominal
level with a chimney draught of 12 Pa are only guaranteed when you use the following
fuels and no others.
Only use natural, dry chopped firewood with a remaining humidity of max. 20%, and
lignite (brown coal) briquettes.
Types of fuels
Heating value appr.
kWh/kg
Brown-coal
Hard wood
Soft wood 5,3 – 5,5
4,0 – 4,2
4,3 – 4,5
With the primary air damper, do you adjust the rated output.
There may be engaged in only the settings and fuel quantities are
given that correspond to your licensed or purchased device.
Adjustment:
Fuel
Setting of the pri-
mary air regulator
Setting of the
fuel selector
Burning
time
8 kW
Warning up,
kindling
H -
Wood
Nominal heating
performance
H ca. 0,75 h
Brown-coal
Nominal heating
performance
K ca. 1 h
Putting out of working
order
K -
Table 2
Filling quantities 8 kW
- Split billet: max. length: 25-33 cm, max. 2 billets per filling, appr. 2kg
- Lignite briquette: max. 2,2 kg
IT IS NOT ALLOWED to burn waste, fine chipping, bark, wood handled with preven-
tive chemicals, furthermore paper and cardboard. For kindling please use wood scrap-
ings or grill starter but never use liquid auxiliaries!
The first kindling
•
At the first fire set-up could be a little smoke, but is not dangerous, normal!
In this time, please ventilate the room carefully!