Construction
Put the top onto the frame, put the parts into the small holes until it clicks. To take down the frame, press the four red
buttons
Warning: Before you use must always be checked if the seat bracket is actually engaged. The upper part is located in the
secured state, when the red box is no longer visible behind the detents. Then try the side-mounted on the backrest straps
once from inside to outside to the slide tube and close the button. Then put the pieces of fabric from the inside out to the
slide tubes and also close the snaps. To remove the front cover, please press the locking levers to stop down. Then pull the
top part of the incisions and take it off.
General
The baby pram has been tested in a temperature range from -20 ° C to +60 ° C . Despite many positive characteristics of
our materials such as air permeability, etc. many textiles react to intense sunlight sensitive. It is better to avoid the sun for
longer stays, and maintain the fresh colors of your baby pram. Between the individual production batches to color differen-
ces can not be avoided. Unfortunately Corresponding complaints can not be accepted. Please understand that improper
handling, any rain edges or color differences in the material , as described above , are not a legitimate complaint. Regular
maintenance of all metal parts , especially the chrome parts and especially after spending time by the sea, on the baby pram
is required to get the high-quality optics . Commercially available cleaning agents are sufficient . Small kits for repairing any
damage to the paintwork on the frame you can contact the dealer . The shaft ends must be cleaned at intervals of about 4
weeks and lightly oiled .
6) Loss of small parts during maintenance errors
7) Damage caused by operator error.
8) Repairs by unauthorized third parties.
9) Warranty does not apply to attempt repairs your-
self.
construction
Adjustment of the bracket and footrest
www.wampol.eu
www.babynana.eu
Adjustable suspension 2 position (hard and soft)
WARRANTY CONDITIONS
These instructions are part and condition of warranty. Complaints are generally handled by the dealer.
Design errors that were found during the warranty period will be repaired within 4 weeks.
The warranty does not include:
1) Wear by abrasion.
2) Damage due to improper storage.
3) Mechanical and thermal defects.
4) Rust by poor maintenance and road salt in winter.
5) Color fading due to UV degradation.
stamp signature
charging: .................. the buyer: .................. sale date: ..................
THE WARRANTY CARD IS INVALID WITHOUT SALES DATE STAMP!
● COMFORT FOR YOUR CHILD ●