background image

1.0  GENERAL INFORMATION

ILV

2

TOR.056.--.M.EN        Issue:  A1     

09.16

1

1.1  Scope of the Manual

This Manual has been prepared by the Manufacturer to provide the operating technical information for instal-

lation, operation and maintenance of the device concerned.
The Manual, which is an integral part of the device concerned, must be preserved throughout the life of the 

device in a known easily accessible place, available for consultation whenever required.

If the Manual is lost, damaged or becomes illegible, contact the Manufacturer for a copy specifying the serial 

number of the device.
If the device concerned changes ownership, the Manual has to be handed over to the new owner as part of 

the device supply.
The Manual is meant for specialist technical personnel appointed and authorized by the Manufacturer, owner 

and installer to act on the device concerned for which specific technical skills in the sector concerned are nec

-

essary (electrical, mechanical, etc.).
The illustrations may differ from the actual structure of the device concerned but do not interfere with the ex-

planation of the operations.

In case of doubt, contact the Manufacturer for explanations.
The Manufacturer reserves the right to make changes to the Manual without the obligation to provide prior The 

Manufacturer reserves the right to make changes to the Manual without the obligation to provide prior com-

munication.
The technical information included in this Instruction Manual is the property of the Manufacturer and therefore 

has to be considered as confidential.

It is forbidden to use the Manual for purposes other than those strictly linked to the operation and maintenance 

of the device.
This information is provided by the Manufacturer in the original language (English) and can be translated into 

other languages to satisfy legislative and/or commercial requirements.

Summary of Contents for TOREX ILV









































Reviews: