WamBlee W420 Rescue-Me, User Manual

Page: 15 / 20


Flash lighting of the battery state green indicator inside the flash
lens (4); during this phase release the pressure from the TEST
pushbutton in order to carry out only the SHORT test.

At the end of the test the red led should turn off indicating the
that the test I s finished.
Device status Green indicator Red indicator
Battery charged 3 flashes On
Battery almost charged 2 flashes On
Battery almost flat 1 flash On
Battery needs changing Off Off
Long test (GPS check)
The execution of the LONG test allows to check the operation of the GPS
module within your W420 AIS MSLD device and allows to emit an AIS test
message.

Make sure the knob (1) is in the 'TEST' position, then press the
'Test/Activation’ pushbutton (5).

Lighting of the red indicator light inside the flash lens (4) and
buzzer tone for about two seconds.

Flash lighting of the battery state green indicator inside the flash
lens (4); during this phase keep the pressure on the TEST
pushbutton.

After about 10 seconds from pressing the TEST pushbutton the
red led will start flashing slowly (1 flash per second). Release the
pressure from the TEST pushbutton.

Your device will try to obtain the position in the next 5 minutes.

If the position is acquired before five minutes, the flash will start
and an AIS test transmission will be performed as confirmation to
the fix found.
15