WWW.
WAMBAM
FENCE.COM
6
ASSEMBLY
INSTRUCTIONS
VG26300
STEP 2:
INSTALL
GATE JIG, POST ANCHORS, AND POSTS
STEP 2.1
STEP 2.2
Identify the location of your gate. Dig a trench
60” long x 6” wide x 5½” deep.
Identify the location of the Metal Post
Stabilizer
(B)
and pound it into the ground.
Temporarily place the anchor positioner
into the metal post stabilizer and determine
position.
Place Gate Jig
(G)
over the metal
post stabilizer.
Place the anchor positioners into gate jig. The
pegs on the bottom of the anchor positioners will
insert into both the gate jig and the metal post
stabilizer.
Backfill excavated dirt over gate jig.
Pound your post anchors into place. See
fence instructions if necessary for more
information on how to install anchors.
Adjust the leveling donuts and install the
posts.
Note:
Metal post
stabilizer to be used
only on hinge post.
5½”
B
G
STEP 2.3
STEP 2.5
STEP 2.6
STEP 2.4
