WamBam Steady Freddy Manual Download Page 27

Page: 27 / 28

16in

For installation videos and more information, visit www.wambamfence.com

Options for Gate Installation

with Space Restriction

OPTION 1

Short Panel Installed to Support

Hinge Post Only

OPTION 2

Add Concrete After Gate Installation

A - After your gate and hardware is installed,

temporarily block up the far end of the gate.

This will relieve pressure on the pipe anchor.

B - Dig a 16” diameter hole approximately 12”

to 18” down lower than the gate stabilizer.

C - Add one or two bags of concrete.

D - Remove the temporary gate block after

concrete cures and back-fill to level grade.

A - If a small panel of fence (as illustrated), can be

installed to support the hinge post only, that is the ideal.

Ground

12-18in

CONCRETE

Concrete

Temporary wood block

Your gate style may not be as illustrated.

Summary of Contents for Steady Freddy





























Search results

Summary of Contents for Steady Freddy

Reviews:

Related manuals for Steady Freddy

Brands by name

Popular brands

WamBam Steady Freddy, Manual

Search results

Summary of Contents for Steady Freddy

Reviews:

Related manuals for Steady Freddy

Brands by name

Popular brands