5 1/2in.
5
Detailed Installation
Instructions
Excavate & Install Gate Jig,
Anchors, & Fence Posts
Slim Jim Aluminum Gate
A
A - Identify location of your gate
B - Identify the location of the metal post stabilizer
and pound into the ground
F - Backfill excavated dirt over gate jig
G -
IMPORTANT:
Make sure to fasten the
fence panels BEFORE attaching the gate
F
B
G
D
Bottom of trench
should be level.
E
D - Place anchor positioners into gate jig
E - Pound your anchors into place
STEP 1
Dig a Trench 60in.
long x 6in. wide
x 5.5in. deep
C - Place vinyl gate jig over the metal post stabilizer
C
Metal post stabilizer
to be used only
on hinge post
Temporarily place the anchor positioner into
the metal post stabilizer and determine position.
Pegs on the bottom of this anchor
positioner will insert into both
vinyl gate jig and post stabilizer.
See fence instructions if
necessary for more information
on how to install anchors, adjust
leveling donuts and install
aluminum posts.
