4.0 INFORMATION REGARDING HANDLING
AND TRANSPORT
2
FIL.SILOTOP_zero.--.M.A4.0722.EN Issue: A4
07.22
16
Danger - Warning
Carry out the lifting and handling operations according to the information indicated on the equipment
and in the Manufacturer’s Operation Manual.
The person authorized for unloading operations has to make sure all the necessary measures are adopt
-
ed to ensure his or her safety and the safety of other persons directly involved.
Use means and accessories (ropes, hooks, shackles etc.) suitable for the load to be lifted.
Pay attention in the lifting phase to balance the load to avoid uncontrolled movements which could
cause work injuries to persons.
Do not stack the packages as they are not sized for that purpose.
Do not drag or push the entire or sections of the equipment as it will damage them.
Before lifting and handling the load, read the relevant information indicated in the “Information regarding
safety” Chapter.
Harness the packages according to the indications and symbols applied on them or harness the sections of
the equipment concerned on the basis of their structure.
The picture shows the lifting points to lift the filter, depending on its configuration.
4.2 Reception of goods
On receiving the goods, ensure that the type and quantity correspond to the data present on the acknowledge-
ment of order.
Possible damage has to be immediately communicated in writing in the space provided to this purpose in the
waybill.
The carrier is obliged to accept the complaint and leave the Customer a copy of the waybill.
If the supply is “free destination” a copy of the waybill and of the complaint shall be sent to the Manufacturer
or to the forwarder.
If the damages are not claimed immediately on receipt of the goods, your request for compensation may not
be accepted.
4.3 Lifting and unloading methods
Summary of Contents for SILOTOP zero
Page 50: ......
