5.3 Disassembly of the matrix LED modules
NOTICE!
Carefully read the following description of the module's removal. Carry out the
steps described in the order listed.
The modules should be removed using the special key tool supplied with the matrix.
...
Loosen and remove all screws.
Lift and remove the module in two steps:
Insert the short, rubber shank of the special
key tool into the thread grooves and lever
out the module.
1. On the contact side
NOTICE!
The rubber part must be
on the short shank of the key tool. It
must also cover the key edges
completely so that it does not
damage the bottom of the module.
2. On the non-contact side
NOTICE!
Check to make sure that
there are no sealing gaskets
remaining between the profile
partitions. Check that all contact pins
still have a seal on them. Thread
them on by hand if necessary.
1.
2.
Summary of Contents for daytime matrix module BR
Page 1: ...Operating Manual...
