Overview
9
Waltron User Manual 101-046-B.3
9096 Degassed Cation Conductivity Analyzer
1.2.2
LIST OF WARNINGS AND POTENTIAL DANGERS
The table below is a list of hazards and dangers warning labels that may be found on the analyzer
and/or in this manual. In case of these labels becoming outdated, they should be replaced with
new ones by the analyzer owner.
Table 1.1: List of hazards and dangers.
Hazard of electrical shock
This symbol is used to present a hazard of severe electric shock or
electrocution. All controls and maintenance on electrical devices labeled with
this symbol should be made by qualified personnel in accordance with national
or local regulations. Qualified Personnel means personnel who have been fully
trained and have professional experience in avoiding electricity hazards and
dangers. To avoid potentially fatal electrical shocks and/or analyzer damage
always disconnect input power to analyzer before servicing.
Hazard of chemical burns
This symbol is used to present a hazard of severe burns and serious injury for
dangerous chemicals manipulation. All handling and operations maintenance on
chemicals labeled with this symbol should be made by qualified personnel in
accordance with national or local regulations. Qualified Personnel means
personnel who have been fully trained and have professional experience in
avoiding chemical hazards and dangers. Before proceeding with the handling of
chemicals and service operations, read the material safety data sheets supplied
with each chemical to take all the necessary precautions when handling.
Harmful
Specific indication depending on the parameter analyzed and the chemical
colorimetric method used.
Warning of general hazard
This symbol means that is necessary read this manual before to proceed to any
service operation to know exactly how to operate in proper way. Only qualified
personnel fully trained on analyzer use and maintenance is allowed to proceed
with service operations on the unit.
